Printing from logic waveview is accomplished by setting up the following form:
From the "Digital Simulation Design Process" menu below, select "Setup"
The following menu appears: Select "Plotter"
Fill out the form like this:
The "Plotter" field selects which printer or plotter your output from Waveview will be spooled to. For the EE Labs, select hplj5m_1. Be sure to select "Local" in the Output field or printing will not work.
Select "Apply" and "Quit"
This completes the printing setup procedure.
To print from Waveview, set up your screen to your liking, and select:
File > Hardcopy > Screen.
Good Luck!
Prepared by Joe Portelli - 11/4/99